|
 |
 View Asset, Person, Vehicle, or Equipment location in real-time |
| View historical movement of vehicle(s) |
| Dispatch - Find nearest vehicle to an address |
| Landmarks - view customer's sites on mapping (with vehicle's location) |
| Set Geo-fences to receive notice if vehicle leaves area |
| Monitor time when vehicle arrives/leaves job site and/or home base |
| View historical reporting (i.e. start time w/address, stop time w/address), miles driven |
| Vehicle Maintenance - track vehicle maintenance items |
| Backup Battery - Use for power disconnect alert (optional) |
| Multiple Telemtry - 2 inputs and 2 outputs for use with multiple PTO's |
|
|
Tracking – Automatic Location
Updates
The GPS200-MOB is for companies or individuals that require a tracking solution that is small, portable and easily hidden. The GPS200-MOB is powered by a rechargeable battery that will last for up to a week ,depending on usage. The GPS200-MOB offers a real-time tracking solution without the need of a hard wire installation. GPS signal coverage works within buildings, parking structures, vehicles and heavy equipment.
The GPS200-MOB reports driving times once every 5
minutes. This can be updated up to once
every 2 minutes or 1 minute, addition
reporting times require an extra monthly fee.
The GPS200-MOB also reports Ignition OFF, Ignition
ON, STOP, and IDLE. All of these events help
the user understand where and what the
driver has been doing.
Ideal for Users with Following GPS Tracking Requirements:
View location in real time. Can
report from 1 -5 minute updates.
View historical movement i.e.
Breadcrumb Trail.
Battery operated: no installation
required.
Will last up to a week on battery.
3 Programmable buttons to call or
set geofences.
Small and compact with
rechargeable battery.
Need for covert or hidden tracking.
Works inside buildings, trailers and
vehicles with no GPS loss.
Push To Call (PTC):
The Push To Call (PTC) switch allows the
user to place a call to a number that has
been programmed. To meet GSM
specification, pressing the PTC button with
no SIM installed will cause the unit to initiate
a “411” call. The application provider will
need to configure the emergency number
for its region.
Set Geo-Fence:
The switch is used to initiate a geo-fence
with a default radius of one-half mile. This
radius may be redefined by the application
provider and is retained in non-volatile
memory. If GPS is not available an error
tone will be generated to alert the user that
no geo-fence was set.
User-Defined Button:
The User-Defined button is a programmable
button that can be defined for various
functions. Some examples of these
functions include: generate a call to a
number different from the PTC button,
generate a geo-fence with different
parameters than the geo-fence button, sendan SMS of the current location to a cell
phone, send the current location to the
server, etc.
Volume Buttons:
The Mini-MT has two volume buttons for
controlling the audio volume level. These
buttons are functional whether in a call or
not. The ‘+' button is used for increasing
volume and the ‘–' button is used for
decreasing volume.
USB Connection:
The USB connector is used for charging the
battery and for data communication. The
unit will charge from a laptop computer, AC
to USB power adapter, or vehicle power to
USB adapter. Data communications with the
Mini-MT is also performed through the USB
connector. The USB connection is used to
configure or customize the Mini-MT
operation. This connection also is used to
provide GPS NMEA data to a mapping or
user application.
Headphone Jack:
The headphone jack provides the user with
the ability to connect a standard 2.5mm
headset (not supplied with the modem)
when the speakerphone mode is not
desirable.
Reports:
There are several useful reports that help the
user understand what their vehicles are doing
and where they are have been.
Activity Report – Provides a detailed report of everyhwere the unit has been throughout the day, in 5-minute intervals.
Breadcrumb Trail – Visual representation of location, at 5-minute intervals, on Google 2D map, or Google Earth 3D map.
Geofence Report – Displays
when a vehicle crossed virtual perimeter, as defined by the user.
Settings:
There are numerous admin settings that let
users organize and customize their tracking needs. Settings are an admin
privilege and can be disabled per user
request.
Company Emails – This will let the
user setup emails for alerts and
schedulers.
Units – You can customize unit names,
and change event names.
Groups – Users have the ability to
assign units to a group for
organization.
Geofences – Provides the ability to
create borders in area and be notified
via email and/or cell phone once
vehicle enters or leaves a specified
area.
Reports Scheduler – The user has the
ability to receive reports via email on
a scheduled basis. User defined
schedule of daily, once a week or
monthly is available.
Specifications:
L x W x H: 4.3" x 3.75" x 1.182"
Input Voltage - 9 - 36 VDC
Operating Temperature: -30°C to +70°C
Storage Temperature: -40°C to +80°C
Housing: Polycarbonate
Weight: 136g
Battery: 1340 mAh
|
